omega rs 6 remote starter

If the vehicle is generally hard to start (requiring the starter to be engaged for more

than 1 second) this method will produce more consistent remote starting. With this

method the ORANGE / Black wire reads the engine speed (tach) information from a

wire in the vehicle. The ORANGE / Black wire connects to the vehicle's tach wire,

which is found in the engine compartment, although in some cases it may also be

located inside the vehicle. To use a multimeter to verify the correct tach wire, set it

for AC Volts scale. The correct wire will read 1 to 6 volts AC with the engine idling,

and will increase with engine speed.

Note: When using this method Programmable Jumper #1 will increase/decrease

the unit's sensitivity.

1) Position the 3-way selector switch for Tach Sense (left position).

2) Locate the Tach Sense & Smart Start adjustment screws and LED indicators.

3) Turn BOTH adjustment screws completely counterclockwise.

4) Start the vehicle.

5) Begin tuning the Tach Sense adjustment screw slowly clockwise until the LED

indicator illuminates solid, then turn the vehicle Off.

- To increase the crank time, tune the adjustment screw counterclockwise.

- To decrease the crank time, tune the adjustment screw clockwise.