my alarm is all screwed up

i hooked my alarm up following all the diagrams and and my parking lights don't flash and i don't hear any chirps when i arm it.

the alarm also doesn't sound when the doors open.

hhheeeeeeelllllllllppppppppppp!!!!!!!!!!!!!!!

you might wanna check that you have all your power wires hooked up correct,constant power hooked to 12v always,and switched to the ignition power with key on and no power with key off,(use dmm if possible) make sure that they are not switched around.double check that you have a solid ground to metal and its not insulated by any plastic,and double check all your fuses,your light flash should have an in-line fuse in it...i would suggest going through all of it again and double check all wires..

hope this helps...