97 grand prix

looking for a dei wire info on this car if anyone can help

|       ITEM      |     WIRE COLOR     |POL|       WIRE LOCATION        | |              12V|red                 |+ |ignition harness            | |          STARTER|yellow              |+ |ignition harness            | |        IGNITION|pink               |+ |ignition harness            | | SECOND IGNITION|white               |+ |ignition harness            | |        ACCESSORY|orange              |+ |ignition harness            | |       POWER LOCK|lt. blue            |- |driver kick panel           | |     POWER UNLOCK|white               |- |driver kick panel           | | PARKING LIGHTS +|brown               |   |at switch                   | |       HEADLIGHTS|yellow              |+ |at switch                   | |     DOOR TRIGGER|tan and dark blue   |- |*1                          | | DOME SUPERVISION|use door trigger    |   |                            | | TRUNK/HATCH PIN|RED / black           |- |under rear deck             | |TRNK/HTCH RELEASE|BLACK/ white        |+ |at switch                   | | FCTRY ALARM ARM|arms on lock *2     |- |drivers kick panel          | |FCTRY ALRM DISARM|ORANGE / black        |- |DKP 32 pin plug pin 5       | |       TACHOMETER|PURPLE / white        |   |ECM under hood              | |      SPEED SENSE|dk.green            |4 |*3                          | |       BRAKE WIRE|white               |+ |stop light switch           | |     HORN TRIGGER|black               |- |steering column             | |           WIPERS|gray               |+ |steering column             | | LF WINDOW UP/DN|dk. blue - brown    |A |LF window motor in door     | | RF WINDOW UP/DN|lt. blue - tan      |A |drivers kick panel          | | LR WINDOW UP/DN|dk. green - purple |A |drivers kick panel          | | RR WINDOW UP/DN|lt. green - purple |A |drivers kick panel          | Notes: *1 The tan is located in the drivers kick and catches only the drivers door. The dark/blue is located in the passenger kick panel and catches all other doors, must diode isolate these wires.   *2 The door trigger must be active to allow the factory alarm to arm. *3 Located at a 10 pin plug on the front of the drivers strut tower. There are two dk.green wires there, use the one in the corner of the plug.