01' ford explorer door locks

Home / the12volt's Install Bay / Car Security and Convenience / 01' ford explorer door locks (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mxxmikexx

Silver - Posts: 796

Joined: September 18, 2002

Location: United States

Posted: November 13, 2002 at 11:52 AM / IP Logged

does anyone have information on hooking up door locks on this vehicle. my techsoft program says the circuit shuts off after the vehicle is left off after a certain period of time, and you need to "wake up" the circuit when interfacing with the door locks. i guess i need document number 1093 if anyone out the uses DEI techsoft info. any help appreciated!!!!!

Player69

Silver - Posts: 504

Joined: October 27, 2002

Posted: November 13, 2002 at 1:46 PM / IP Logged

All you have to do to bypass the BCM shutdown is pulse the BLACK / YELLOW wire in the drivers kick with a - pulse before the doors unlock. This output on your remote start might be labeled as pulse before or factory alarm disarm.

djfearny2

Silver - Posts: 810

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 23, 2002

Location: United States

Posted: November 13, 2002 at 4:25 PM / IP Logged

EITHER DO THAT OR SET THE ALARM TO DOUBLE UNLOCK PULSE AND DIODE ISOLATE THESE WIRES TOGETHER WITH THE UNLOCK WIRE FROM THE ALRM. AND WHAT WILL HAPPEN IS THE FIRST UNLOCK PULSE WILL WAKE UP BRAIN AND SECOND WILL OPEN THE DOORS , YOU CAN USE THE DRIVERSIDE REAR DOOR PIN TO WAKE UP THE DOOR LOCK MOD CALLED THE GCM OR SOMETHING.

Jon

Installer/Help Technician

---coral springs florida---

mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

01' ford explorer door locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.