the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

pulse timer relay & info on directfax


Post ReplyPost New Topic
< Prev Topic Next Topic >
mavrick 
Member - Posts: 10
Member spacespace
Joined: November 15, 2002
Location: Canada
Posted: November 18, 2002 at 8:58 PM / IP Logged  

I am looking for a directfax document #1091?

For wait to start for a diesel engine (F-350) Where do I find this?

how do I get this diagram?

The second thing is I need to install a pulse timer relay for the wait to start, where can I get one?

I have check Radio shack and about 6 differant electronic store to no avail. help.

Thanks alot for the great info.

Player69 
Silver - Posts: 504
Silver spacespace
Joined: October 27, 2002
Posted: November 18, 2002 at 9:08 PM / IP Logged  
what year is the truck and what kind of starter are you intalling? Does it have the choice betweek + or - input for glow plugs?
mavrick 
Member - Posts: 10
Member spacespace
Joined: November 15, 2002
Location: Canada
Posted: November 18, 2002 at 9:11 PM / IP Logged  

the truck is a Ford F-350

the remote starter is a Pro start (Auto start unit)

it only has a + input for the glow plug

and I don't have the CD stacker to us the input wire from that either

Player69 
Silver - Posts: 504
Silver spacespace
Joined: October 27, 2002
Posted: November 18, 2002 at 9:30 PM / IP Logged  
Again, what year is the truck.  199? 200?
mavrick 
Member - Posts: 10
Member spacespace
Joined: November 15, 2002
Location: Canada
Posted: November 18, 2002 at 9:36 PM / IP Logged  
Sorry.... its a 2003 F-350 ford
Player69 
Silver - Posts: 504
Silver spacespace
Joined: October 27, 2002
Posted: November 18, 2002 at 9:45 PM / IP Logged  

Well, according to my info that truck does not have a way to get the glow plug wires because it uses a data bus signal to the cluster. 

However, I have been able to find a glow plug wire at the back of the instrument cluster.  It is a BLACK/ pink wire.  Test this with a DMM, it should be ground when the glow plug light is on and +12 after that.

If this is the case, you are in luck.  Because your pro start only has a + input you need to use a relay as follows:
85 to BLACK/ pink wire of glow plug
86 to ignition (+12v when ignition is on)
87 to ignition (+12v when ignition is on)
30 to remote start glow plug input

You might have to hook 87a to ground.  Try it without first.

If the BLACK/ pink wire does not exist or does not test right you will have to use a timed start.  I don't think pro start has that option.

mavrick 
Member - Posts: 10
Member spacespace
Joined: November 15, 2002
Location: Canada
Posted: November 18, 2002 at 9:50 PM / IP Logged  
Thanks Player69, I hope this will works I will try it tomorrow again thanks for the info I will be back if it dosn't work out tomorrow.
mobileinstallat 
Copper - Posts: 92
Copper spacespace
Joined: October 14, 2002
Location: United States
Posted: November 18, 2002 at 10:11 PM / IP Logged  

This is what I have on a 2002!  not a 2003!

just for ref:

GLOW PLUG WIRE:

For Diesel Vehicles,

PURPLE / ORANGE OR WHITE/ LT. GREEN IN 42-PIN CONN. UNDER AIR FILTER BOX

 The Tach Wire Is Green And Can Be Found In A 42-Pin Connector Found Underneath The Air Filter Box. Remove The Air Filter Box To Access Wires.

like I said this is for a 2002! may not apply! If this is not still good info please correct me!

thanks,

Mark

Mark

mavrick 
Member - Posts: 10
Member spacespace
Joined: November 15, 2002
Location: Canada
Posted: November 20, 2002 at 11:43 AM / IP Logged  

Hi from Keith,

this is for Mark the last posting, and of others

the 2003 superduty trucks have changed many of the wire color codes and there is no wiring harness under the air box .

The tach wire not Green the tach wire is White with green stripe. ( this info came stright from a Ford dealer,) but even they didn't even no what wire or wire are for the glow plug. 

the 12 volt wire at the ignition harness is Yellow X 2 of them no stripe

I still hoping what Player69 stated above will work but I haven't had time to check it out yet I will kepp you posted,


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer