the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

siren pulsing?


Post ReplyPost New Topic
< Prev Topic Next Topic >
dpquez 
Member - Posts: 2
Member spacespace
Joined: June 10, 2005
Location: United States
Posted: June 10, 2005 at 7:16 PM / IP Logged  

Here's the dilema,

Bought a used truck. Had an alarm already installed turn's on and off okay. But when triggerd the alarm pulses on and off. Disconnected from alarm and conected to the battery. Works fine that way. Any suggestion? 

dpquez 
Member - Posts: 2
Member spacespace
Joined: June 10, 2005
Location: United States
Posted: June 10, 2005 at 7:43 PM / IP Logged  

siren pulsing? -- posted image.

Here is a picture of the board. Not sure what brand.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer