92 buick park ave alarm disarm wire

Home / the12volt's Install Bay / Car Security and Convenience / 92 buick park ave alarm disarm wire (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

checkedout

Member - Posts: 5

Joined: June 27, 2005

Location: United States

Posted: July 07, 2005 at 6:11 AM / IP Logged

I installed a remote starter and connected the factory alarm shutdown wire to the light green wire low in the drivers side kick panel But when the doors are locked and I use the remote starter the alarm goes off. Since the car does start I believe I have the VATS bypassed correctly? Am I correct in thinking I may have the wrong light green wire?

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: July 07, 2005 at 8:52 AM / IP Logged

You need to confirm the wire with the Key Switch in the door. When you UNLock the door with the key, it should show GROUND in the UNLock position. Otherwise, confirm you are getting a GROUND when you Remote Start.

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

92 buick park ave alarm disarm wire

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.