the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Hooking alarm up to fuel cut off


Post ReplyPost New Topic
< Prev Topic Next Topic >
Synned 
Member - Posts: 11
Member spacespace
Joined: August 06, 2005
Posted: August 12, 2005 at 5:21 PM / IP Logged  
Hey, I have a 95 Mustang GT with a Crimestopper cs-2016fm alarm/remote start. I also have a hidden fuel cut off switch and I was wondering if it would be possible for me to hook up the alarm system to that, so when it is armed there is no power going to the fuel pump. This is probably basic stuff but I am a novice with this stuff. I did install my alarm so I have a little bit of knowledge.
Thanks
Joe
auex 
Platinum - Posts: 5,041
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 23, 2002
Location: Arizona, United States
Posted: August 12, 2005 at 5:56 PM / IP Logged  
Not the best idea.
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Synned 
Member - Posts: 11
Member spacespace
Joined: August 06, 2005
Posted: August 12, 2005 at 8:27 PM / IP Logged  
I believe you but why?
Synned 
Member - Posts: 11
Member spacespace
Joined: August 06, 2005
Posted: August 13, 2005 at 8:34 AM / IP Logged  
Is this not possible? Why is it a bad reason?
rsudbay 
Copper - Posts: 68
Copper spacespace
Joined: December 02, 2004
Location: United States
Posted: August 14, 2005 at 1:27 AM / IP Logged  

just place a relay next to your switch. wire the relay to the starter disable wire on the alarm. then you have a manual switch also for extra safty.    and there is nothing wrong with cutting the power to the fuel pump. i have seen it done many times

hey, everyone has got to start somewhere. but ill learn
Fastlearner 
Silver - Posts: 346
Silver spacespace
Joined: March 23, 2005
Location: United States
Posted: August 14, 2005 at 2:12 AM / IP Logged  
Why not just have a starter kill relay.
Chris Luongo 
Platinum - Posts: 3,746
Platinum spaceThis member consistently provides reliable informationspace
Joined: May 21, 2002
Location: Massachusetts, United States
Posted: August 14, 2005 at 11:19 AM / IP Logged  
If a starter kill fails, customer will be stranded at the mall or at home. Sucks, but not the end of the world.
If a fuel kill fails, customer might be stranded on the roadside. They'll be quite angry. Even worse, if they're a lousy driver, they'll allow the car to come to a stop in the roadway, have an collision, and the shop could be liable.
If you do a fuel kill, be very, VERY careful about the quality of your work, and make a way to jumper the system back to normal (without tools) should something fail.
riceman 
Copper - Posts: 109
Copper spacespace
Joined: October 14, 2004
Posted: August 15, 2005 at 7:30 PM / IP Logged  
I argee with chris. I dont recommend doing the fuel cut off but if its your car then it's gonna be wired exactly the same as a starter kill just your gonna be doing it in the trunk. Thats where Ford puts most of there inertia fuel pump kill switch. These switch are put there just in case the car flips over and there no extra fuel being pumped. Also sometimes when you throw luggage or sub boxes around i.e not securing boxes, you can set off the switch and you get a no start for no apparent reason. to get back on the road just press the switch. good luck
auex 
Platinum - Posts: 5,041
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 23, 2002
Location: Arizona, United States
Posted: August 15, 2005 at 7:46 PM / IP Logged  
Chris Luongo wrote:
If a fuel kill fails, customer might be stranded on the roadside. They'll be quite angry. Even worse, if they're a lousy driver, they'll allow the car to come to a stop in the roadway, have an collision, and the shop could be liable.
Just to add to this, if the fuel kill goes out while driving the customer will be left without power steering and power brakes which can lead to a collision. These are the reasons why I dislike and don't recommend fuel kills.
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Fullthrottle 
Copper - Posts: 101
Copper spacespace
Joined: December 03, 2002
Location: United States
Posted: August 16, 2005 at 5:50 PM / IP Logged  
auex wrote:
Chris Luongo wrote:
If a fuel kill fails, customer might be stranded on the roadside. They'll be quite angry. Even worse, if they're a lousy driver, they'll allow the car to come to a stop in the roadway, have an collision, and the shop could be liable.
Just to add to this, if the fuel kill goes out while driving the customer will be left without power steering and power brakes which can lead to a collision. These are the reasons why I dislike and don't recommend fuel kills.
You can still steer the car and the brakes would have enough vacumn left to safely stop on the side of the road.
But I know what your saying - liability these days.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer