the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

91 acura legend remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
simonmai 
Member - Posts: 9
Member spacespace
Joined: October 31, 2005
Location: United States
Posted: October 31, 2005 at 3:17 PM / IP Logged  
I installed the remote start in my 91 acura legend 4 door sedan,everythings went well but the engine will NOT start if I open one of 4 door and all the door closed it will start and when I open either on of the door,it will shut off right away,I really don't know whats wrong with it.Please help me out.Thanks
Here is my unit information,this is junk one but works well.
http:///.com/dll?ViewItem&item=5806625489&rd=1&sspagename=STRK%3AMEWN%3AIT&rd=1
simonmai
pss5075104 
Copper - Posts: 144
Copper spacespace
Joined: February 09, 2005
Location: United States
Posted: October 31, 2005 at 3:28 PM / IP Logged  
It sounds like you have your door trigers hooked up to the hood pin switch wire. the hood pin switch is designed to when it see's ground shut the system down becasue the hood wouuld normally be open.
D
MECP First Class Certified Installer.
Nothing is impossable, it's just more expensive.
simonmai 
Member - Posts: 9
Member spacespace
Joined: October 31, 2005
Location: United States
Posted: October 31, 2005 at 9:20 PM / IP Logged  
I think  I did it right on the  door trigger wiring(BLACK/ white).But I really don't know what went wrong here,thanks for replying so fast and if anythings else you guys might think I ,please let me know.Thanks a lot
simonmai
pss5075104 
Copper - Posts: 144
Copper spacespace
Joined: February 09, 2005
Location: United States
Posted: November 01, 2005 at 4:07 PM / IP Logged  

i know this sounds stupid but did u meter the wire. with the door open it should read 0v, with it closed it should read around 12.6v.

D
MECP First Class Certified Installer.
Nothing is impossable, it's just more expensive.
mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: November 01, 2005 at 4:34 PM / IP Logged  
Are you sure you do not have the HOOD PIN wire from R/S going to the Door Switch??
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, June 10, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer