the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

no Accessory Power


Post ReplyPost New Topic
< Prev Topic Next Topic >
groonn 
Member - Posts: 5
Member spacespace
Joined: July 12, 2005
Location: United States
Posted: December 21, 2005 at 3:36 PM / IP Logged  
I have a BlackWidow Z5 alarm & remote start that is not providing any power to the accessory line.
I was wondering if I could just use a relay to trigger power from one of the constant 12v+ to the accessory line using the ignition line as a trigger, and if so, how would I wire that?
Thanks for helping a newbie!
tex12gage 
Copper - Posts: 83
Copper spacespace
Joined: September 28, 2005
Location: United States
Posted: December 21, 2005 at 4:43 PM / IP Logged  
Are you asking how to wire the relay with your Ignition and a 12v constant?
tex
groonn 
Member - Posts: 5
Member spacespace
Joined: July 12, 2005
Location: United States
Posted: December 22, 2005 at 11:44 AM / IP Logged  
Yes, I would like to know how to wire the relay so that the ignition wire is the positive trigger, and the power to the accessory line is supplied from a 12v constant.
Thanks
tex12gage 
Copper - Posts: 83
Copper spacespace
Joined: September 28, 2005
Location: United States
Posted: December 23, 2005 at 9:08 AM / IP Logged  

Ignition - pin 86

Ground - pin 85

+12volt - pin 87

Acces. - pin 30

Leave 87A open

tex
groonn 
Member - Posts: 5
Member spacespace
Joined: July 12, 2005
Location: United States
Posted: December 25, 2005 at 10:12 PM / IP Logged  
Thanks!!!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, July 21, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer