Alarm/Remote Start in 06 Nissan Titan

Home / the12volt's Install Bay / Car Security and Convenience / Alarm/Remote Start in 06 Nissan Titan (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

kgs480

Member - Posts: 3

Joined: February 13, 2006

Location: United States

Posted: February 13, 2006 at 9:35 PM / IP Logged

Hey all - I'm trying to install an Audiovox APS997 and am having some problems, hoping you could all help. First, the remote start will only work after the alarm has been disarmed. Is this just a programming issue or is something wired wrong? Second, the shifter is stuck in park unless I unlock it using the unlock button. After it's unlocked, it will shift into drive but then will only go back to neutral and has to be unlocked to shift back into park. Any help would be great.....

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: February 13, 2006 at 10:32 PM / IP Logged

For the no start issue.....did you "energize" the key sence wire BLACK/ red POS(+) pin 24 bcm? power this up with a ground while running, and a relay.

The shifter: does it work correctly when the truck is NOT remote started?

Chris Luongo

Platinum - Posts: 3,746

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: February 14, 2006 at 7:17 AM / IP Logged

You don't need keysense; at least I've never used it. Also, the new APS-997 has an extra onboard relay to do stuff like that, which is cool.

What happens when you try to remote start it while armed? Please be specific. Parking light flash but no ignition? Ignition comes on but doesn't crank? Cranks but doesn't start? Red security light on or off?

Most likely, you have the remote starter's starter output, on the wrong side of the starter-kill relay.....so that the kill relay prevents cranking while armed.........move the starter output to the "body" side of the kill relay, not the "keyswitch" side.

As far as the shifter, that's really bizarre. Like Kar Tune Man asks, does it work correctly when just driving the car with the key? And do the brake lights work all the time? After all, you need the brake to enable the shifter.

kgs480

Member - Posts: 3

Joined: February 13, 2006

Location: United States

Posted: February 14, 2006 at 9:24 AM / IP Logged

When it's armed it will try to start but doesn't. It will try three times and then the transmitter will say "inhibit". Then once the alarm is disarmed, it will remote start just fine. I tried to switch the starter output wires as per Audiovox tech and still no luck. Does it matter if the valet key was used for the transponder? I'll double check the position of the wires just to be sure. As for the shifter - it does not work correctly while driving with the key. I have to used the unlock button. In the manual it says that it will not work if the battery has just been charged - makes sense since the battery did die. But even after letting the truck run for a while and moving it around it still does the same thing. Could the factory anti-theft be kicking in and that's why I'm having problems?

kgs480

Member - Posts: 3

Joined: February 13, 2006

Location: United States

Posted: February 14, 2006 at 7:24 PM / IP Logged

Ok I got it.. I had a wire switched which was why it would only remote start when disarmed and a fuse was blown which was why it wouldn't shift. Thanks for all the help and info.......

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Alarm/Remote Start in 06 Nissan Titan

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.