Clifford RSX 3.5, 1994 eclipse

Home / the12volt's Install Bay / Car Security and Convenience / Clifford RSX 3.5, 1994 eclipse (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

94wedge

Member - Posts: 2

Joined: March 02, 2006

Location: United States

Posted: March 02, 2006 at 5:46 PM / IP Logged

I'm installing a Clifford RSX 3.5 in a 1994 eclipse. I was just wondering if I can use the 3 pin plug wires from the 451m relay (blue, red, and green) to actuate the stock door lock relay, or if I need to install the 451m? Thanks.

ringojam

Copper - Posts: 215

Joined: June 10, 2003

Location: Manitoba, Jamaica

Posted: March 02, 2006 at 6:20 PM / IP Logged

Most mitusbushi are -pulse door lock dont need the451m cut it off and use the blue wire unlock and the green wire lock do not use the red wire.

Jamaica home of the worlds fastest man.

94wedge

Member - Posts: 2

Joined: March 02, 2006

Location: United States

Posted: March 02, 2006 at 7:45 PM / IP Logged

Ok, Thanks man.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clifford RSX 3.5, 1994 eclipse

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.