AutoMobility Sensor

Home / the12volt's Install Bay / Car Security and Convenience / AutoMobility Sensor (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

chadder

Member - Posts: 3

Joined: January 09, 2006

Location: United States

Posted: June 17, 2006 at 1:20 PM / IP Logged

I had a viper 791XV installed in my 2001 Grand am SE1 a month and a half ago and about a week ago I had a sensor fall from over the dash. It was never hooked up and I was just trying to see if anyone knew what it is. all it says is AutoMobility. it has 1 harness with two thick wires(1 white and 1 Pink) and a 2nd harness with 5 thin wires ( brown blue yellow purple and black) Thanks for any help

Chadder

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: June 17, 2006 at 4:10 PM / IP Logged

It is probably a passive starter kill system. Don't bother hooking it up as they have a habit of leaving people stranded.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

AutoMobility Sensor

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.