valet 561r, 2001 tundra

Home / the12volt's Install Bay / Car Security and Convenience / valet 561r, 2001 tundra (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

rustys97tj

Member - Posts: 4

Joined: December 31, 2006

Location: United States

Posted: December 31, 2006 at 1:06 PM / IP Logged

i cant seem to get this working.. the starter kicks in, engine turns over, but it just wont fire...

im using the diagram from the book, and a diagram off here.

heavy gauge relay wiring

red 12/v = white in the ignition harness pink ignition output = black / yellow violet starter output = green / black

red 12/v = white / red pink / white ignition 2 output = not hooked up.

remote start harness

black / white (neutral safety) = ground violet / white (tach) = yellow injector wire brown (brake) = green / white @ brake switch grey = hood pin blue/white (-200ma 2nd status/rear defogger output = not hooked up

4 pin satellite not hooked up

primary harness

white (light flash) = green @ dimmer switch black = ground nothing else on this harness is hooked up

any information would be great..... thanks

chris354

Silver - Posts: 253

Joined: February 19, 2005

Location: United States

Posted: December 31, 2006 at 1:17 PM / IP Logged

the pink/white rs wire needs to go to BLACK/ red in the truck.

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: December 31, 2006 at 1:22 PM / IP Logged

thats engine start but do not turn-over...

relay pack wires -> ignition harness:

red -> WHITE/ red or white

pink -> BLACK / YELLOW

pink/white -> BLACK/ red

orange -> blue/red

purple -> GREEN/ black

neutral safety switch (NSS)- ground

tach wire :

It is black on the 6 cylinder models, and blue/white on the 8 cylinder models, at the instrument cluster. On the 6 cylinder models the black wire is also found on the drivers side of the motor at the diagnostic connector. On the 4.7L V8 can also use BLACK/ blue at coil #1 on the drivers side.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

rustys97tj

Member - Posts: 4

Joined: December 31, 2006

Location: United States

Posted: January 01, 2007 at 10:17 AM / IP Logged

thanks for the help guys............. works great...

rustys97tj

Member - Posts: 4

Joined: December 31, 2006

Location: United States

Posted: January 01, 2007 at 10:24 AM / IP Logged

I just installed a valet 561r on a 2001 tundra.. works great but i have lost control of my windows and door locks.. thats with and with out the valet system hooked up. im not sure but i think ive burned something up. i do have power at the door switch, for the locks and windows, & theres continuity through the switch... any ideas on what else i can test.. thanks any info..

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: January 01, 2007 at 10:33 AM / IP Logged

I would first go thru with a DVM and check every fuse inside and out....

Mike M2

Tech Manager

CS Dealer Services

rustys97tj

Member - Posts: 4

Joined: December 31, 2006

Location: United States

Posted: January 01, 2007 at 10:37 AM / IP Logged

ive been through all the fuses inside and out, i have power at the switchs, and they work, im just not getting a response from the motors for the locks or windows..

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: January 01, 2007 at 2:31 PM / IP Logged

did you unplug any harnesses? if so, id check around at the fuse box.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

valet 561r, 2001 tundra

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.