Clifford Matrix 3.5 RSX fuses

Home / the12volt's Install Bay / Car Security and Convenience / Clifford Matrix 3.5 RSX fuses (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

pestilence

Member - Posts: 4

Joined: November 04, 2005

Posted: January 08, 2007 at 5:34 PM / IP Logged

I pulled all of the fuses out of the alarm (12v power wire etc) before I installed it. It took me a few weeks to finish up and unfortunately I have since lost those fuses. I can just go and buy new ones but I don't remember what fuses go where, can anyone help me out?

thanks

mobilecustoms

Silver - Posts: 397

Joined: November 04, 2005

Posted: January 08, 2007 at 6:53 PM / IP Logged

30 amp to red ignition XCRS wires, 10 amp to parking lights, 15 amp to red power wire in 12pin harness. ATO type fuse- any auto parts store, radio shack etc.

pestilence

Member - Posts: 4

Joined: November 04, 2005

Posted: January 11, 2007 at 7:14 PM / IP Logged

Ahhhh! thanks mobilecustoms much appreciated

mobilecustoms

Silver - Posts: 397

Joined: November 04, 2005

Posted: January 11, 2007 at 7:56 PM / IP Logged

no problem

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clifford Matrix 3.5 RSX fuses

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.