the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Crimestopper GM-SL2


Post ReplyPost New Topic
< Prev Topic Next Topic >
e140 
Member - Posts: 2
Member spacespace
Joined: December 31, 2006
Posted: January 08, 2007 at 7:56 PM / IP Logged  
Doing remote start on a 2007 Trailblazer and was wondering if the yellow key wire needs to be split into the bypass.  I know the Data OBD2 needs to be hooked up.  On my instructions it states Cadillac Only for the yellow?  But I think I need to split the yellow and also add the Data BCM to the ORANGE / black?  Just want to make sure.  Thanks.
e140 
Member - Posts: 2
Member spacespace
Joined: December 31, 2006
Posted: January 08, 2007 at 9:35 PM / IP Logged  
Did somemore searching and it seems like they all need to be hooked up.  Even the DEI splits the yellow and adds the BCM.  Hope my Remote start had a neg out while running......

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer