programming f-150 security remote

Home / the12volt's Install Bay / Car Security and Convenience / programming f-150 security remote (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Iggy

Member - Posts: 3

Joined: January 31, 2003

Location: United States

Posted: January 31, 2003 at 8:53 PM / IP Logged

I just got two new remotes for my 97' F150 but have no instructions on how to program them. It is a factory Star 30 ESP system but only requires turning the ignition off/on three times within 10 sec. to set the emergency override.

Any help is appreciated.

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 31, 2003 at 10:32 PM / IP Logged

Hope this helps:

http://www.velocitymotorsport.com/images/install_notes/101.jpg

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Iggy

Member - Posts: 3

Joined: January 31, 2003

Location: United States

Posted: January 31, 2003 at 10:56 PM / IP Logged

Thanks, Jeff

The original remote is now working but I still can't get the new ones to work.

When we do the ignition on/off we get four chirps after the fourth time but no signal from the door locks.

Iggy

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 31, 2003 at 11:06 PM / IP Logged

I'll have to get back to you on this & talk to one of my suppliers and see if I can get some more information for you.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Iggy

Member - Posts: 3

Joined: January 31, 2003

Location: United States

Posted: January 31, 2003 at 11:26 PM / IP Logged

Thanks again,

Hope they have an answer.

Iggy

Scott35

Silver - Posts: 258

Joined: August 02, 2002

Location: United States

Posted: February 01, 2003 at 8:41 AM / IP Logged

My papers say to cycle the ignition from off to run 5 times in 10 seconds. All doors lock then unlock to confirm programming mode.

Tacomacrew

Haku

Copper - Posts: 204

Joined: November 22, 2002

Location: United States

Posted: February 01, 2003 at 10:07 AM / IP Logged

Iggy, send me your email address and I will email you the factory TSB on programming all Ford/Mercury vehicles up to 1998.

Shawn ip3@centurytel.net

Hak

Siemens Autostart

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

programming f-150 security remote

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.