the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

06 torrent security light on


Post ReplyPost New Topic
< Prev Topic Next Topic >
certifiedinstal 
Member - Posts: 3
Member spacespace
Joined: September 10, 2006
Location: United States
Posted: January 28, 2007 at 1:46 PM / IP Logged  
Confused, installed 562t in 2006 torrent. calls for a 556L and it does work fine but he sucurity light is always on, even with key starts. I have tried another 556L and a bunch of differnt wire setups. The car light will go out if i pull the 556L fuse but wont remote start obviously. any special programming for this type passlock 2?
~ What the...?
mikvot 
Gold - Posts: 1,043
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 19, 2006
Location: Missouri, United States
Posted: January 28, 2007 at 7:01 PM / IP Logged  

The module must first be programmed before operation, use the following procedure:

IMPORTANT! The vehicle must be started within 15

seconds or the module will automatically exit the learn

routine.

1. Cycle the ignition On/Off 2 times.

2. Start the vehicle and keep it running for at least 10-seconds.

3. The LED on the module will flash 2-times.

4. Wait for the LED to flash once very quickly (within 5-seconds)

of ignition On. The R-code is learned.

3. Programming is now complete. Turn the vehicle’s ignition off

and test remote start at least twice.............Also, on directwire it says that the keysense wire is neccesary for remote start.

customak47 
Copper - Posts: 164
Copper spacespace
Joined: October 25, 2005
Location: Vanuatu
Posted: January 29, 2007 at 1:47 PM / IP Logged  
I had the same problem with its equivilant, the plxr from bypasskit.com. I know this sounds stupid, but it worked. make sure all doors are closed during programming and latch the driver door closed during programming. goofiest stuff i heard in a while. the light would stay off if remote started with door open, soon as you closed the door the light came on. program unit with all doors closed.
My rifle is my friend...
certifiedinstal 
Member - Posts: 3
Member spacespace
Joined: September 10, 2006
Location: United States
Posted: January 29, 2007 at 5:49 PM / IP Logged  
Thanks for the textbook answer but I tried that many times per instructions. The led never comes on or flashes, only once when powered up. thanks anyway
~ What the...?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, May 12, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer