info for 05 toyota sienna

Home / the12volt's Install Bay / Car Security and Convenience / info for 05 toyota sienna (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

pitoaudiovisual

Copper - Posts: 388

Joined: April 25, 2005

Location: Pennsylvania, United States

Posted: March 11, 2007 at 6:26 PM / IP Logged

i have to do a remote start / alarm combo on an 05 Toyota Sienna and i was wondering how to do the power trunk hatch and side doors .. Could i just connect one wire to the power sliding door and hatch or do i need relays. any help is appreciated.. thanks..

Confidence is the key to any project!!

Search for other posts by pitoaudiovisual

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: March 11, 2007 at 8:24 PM / IP Logged

The sliding side doors can be opened with a negative trigger.

Driver door is YELLOW /GREEN 22 pin white connector pin 11 left of dash.

Pass. door is purple same connector pin 9. My info does NOT say if it's a latched pulse or not. Nor does it say if they close the same way....test the wire FIRST!

The trunk/hatch release requires a capacitor ....I haven't the foggiest idea how to even tell you how to wire it.It requires a LONG strong pulse to activate.

I'll try if you want me too? Some of the tech sheets say just to use a relay for NEG(-) trigger on a yellow/red, between the sliding door wires???

customak47

Copper - Posts: 164

Joined: October 25, 2005

Location: Vanuatu

Posted: March 12, 2007 at 11:08 AM / IP Logged

I just did one of these siennas two weeks ago and had no problem wiring up the power hatch, I was using an ultrastart 1270 and when you program unit for negative park lights, it gives you a positive trunk output, so I used a relay to switch it to negative trigger and had no problem, but the ultras have a validity trunk output, so as long as you hold the button down it will output.

My rifle is my friend...

pitoaudiovisual

Copper - Posts: 388

Joined: April 25, 2005

Location: Pennsylvania, United States

Posted: March 12, 2007 at 3:38 PM / IP Logged

what about the sliding door did you do the sliding door..

Confidence is the key to any project!!

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: March 12, 2007 at 7:47 PM / IP Logged

All 3 doors are a simple negative pulse for open and close. I've done them many times, never needed a relay or a capacitor for anything. Use the colors Kartuneman describes and connect them directly to the channel outputs on your alarm and they will work fine. You do have to make sure the bypass switch on the knee bolster is plugged in for them to work....

Mike M2

Tech Manager

CS Dealer Services

pitoaudiovisual

Copper - Posts: 388

Joined: April 25, 2005

Location: Pennsylvania, United States

Posted: March 12, 2007 at 8:53 PM / IP Logged

thanks so much i will try that on Saturday and let you know how it comes out..

Confidence is the key to any project!!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

info for 05 toyota sienna

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.