2003 dodge durango

Home / the12volt's Install Bay / Car Security and Convenience / 2003 dodge durango (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

528 car audio

Member - Posts: 4

Joined: February 07, 2003

Location: United States

Posted: February 07, 2003 at 7:08 PM / IP Logged

we have a 2003 durango with a cliford remote starter installed . the problem that where gettin is when i remote start the truck it puts the security light on but at random times. we put a dei 555u and it has a problem and a 555c wont learn. all the wire are powered up so i dont know what to do. if someone has done this truck i would really like some help on this problem thanks/

securinu

Silver - Posts: 772

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 15, 2002

Location: United States

Posted: February 07, 2003 at 8:28 PM / IP Logged

it has to be the sentry key . how are you learning the key for the 555c???

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 07, 2003 at 9:43 PM / IP Logged

If using the 555U, make sure that the ring is ecure and snug around the cylinder.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

528 car audio

Member - Posts: 4

Joined: February 07, 2003

Location: United States

Posted: February 08, 2003 at 9:51 AM / IP Logged

i tryed it all im waiting for a part from bypasskit ill see if it works but if theres any other ideas please let me know. as for the 555u when you put the key in after remote start it would see 2 keys and put the security light on so i bypased the 555u with the key sense, it works fine but the light kicks on after like 10 to 20 starts. so i really dont know what to do new cars they suck more and more for us to do. i hope someone can help with this if they did one thanks

jayts95

Copper - Posts: 150

Joined: April 24, 2002

Location: Michigan, United States

Posted: February 08, 2003 at 2:38 PM / IP Logged

Did you try the factory alarm disarm on the truck?

528 car audio

Member - Posts: 4

Joined: February 07, 2003

Location: United States

Posted: February 08, 2003 at 6:28 PM / IP Logged

yes i did it disarms but thats not the problem i dont even arm it yet. but thanks for your help.

Bnluis

Silver - Posts: 578

Joined: December 24, 2002

Location: New York, United States

Posted: February 08, 2003 at 8:18 PM / IP Logged

I had the same problem we are a few Jeep Grand Cherokees, 2002 and 2003's the Sentry security light would blink when second key inserted and shifted into gear in the ignition switch. , But these would only happened every once in a while. I isolated it with the key sense water. I used the 555C. It seemed to work pretty well.

Luis

Sound Waves

Is up to the installer to test all wires with a DMM whenever possible.

securinu

Silver - Posts: 772

Joined: September 15, 2002

Location: United States

Posted: February 08, 2003 at 8:41 PM / IP Logged

you did code in the other key right???

528 car audio

Member - Posts: 4

Joined: February 07, 2003

Location: United States

Posted: February 09, 2003 at 8:46 AM / IP Logged

thanks again i tryed to isolate 555u with the key sense it seemed to work but the truck came back. the 555c wont learn on that truck so i dont really know what else to do i hope someone can tell me thanks.

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 09, 2003 at 9:11 AM / IP Logged

Make your own bypass with a relay and use the Sentry key ( gey head ) for the bypass. This will work .

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.