having trouble with remote start

Home / the12volt's Install Bay / Car Security and Convenience / having trouble with remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

harlyneisenmann

Member - Posts: 43

Joined: February 08, 2003

Posted: February 11, 2003 at 3:38 PM / IP Logged

i hooked up a remote start to my 1999 durango. now what it does when i try to st art it is the car turns on but it doesn't start. the flash code for the lights says low or no tach signal i have the tach wire hooked up to the blk/gr wire to the ignition coil. if anyone can help it would be nice

harlyneisenmann

Member - Posts: 43

Joined: February 08, 2003

Posted: February 11, 2003 at 6:44 PM / IP Logged

never mind i found the problem it was one of the constant +12 it was disconnected thank you all for your help.

harlyn eisenmann

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

having trouble with remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.