530t problem

Home / the12volt's Install Bay / Car Security and Convenience / 530t problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

gaujo

Member - Posts: 3

Joined: July 23, 2007

Posted: July 24, 2007 at 10:36 AM / IP Logged

I installed a DEI 530t to give me one touch windows, and it works great off the switches, but whenever I use the orange or RED / white wire (so u can send the windows up when you arm the alarm) one window goes up and the other goes down! How can I fix this? How come it works fine on the switches and messed up with this?

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: July 24, 2007 at 2:19 PM / IP Logged

Ground the orange wire...whatever window goes down you messed up. You switched the UP and DOWN wires. You have the SWITCH and MOTOR side correct. You will need to switch the 4 wires going the wrong window.

gaujo

Member - Posts: 3

Joined: July 23, 2007

Posted: July 24, 2007 at 3:44 PM / IP Logged

I'm not quite sure what you meen? It's the passenger side that goes down when it should go up. What wires do I need to change? I have cut the wires in the driver's door like the driver's switch side was the "SWITCH" side.

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: July 24, 2007 at 7:13 PM / IP Logged

You reversed the UP and DOWN wires. Switch the passenger side MOTOR DOWN with the MOTOR UP Wire. Switch the passenger side SWITCH UP wire with the SWITCH DOWN wire.

gaujo

Member - Posts: 3

Joined: July 23, 2007

Posted: July 25, 2007 at 12:18 AM / IP Logged

that did it! Thank you very much, you've made my day :-)

Now if you're willing I have another question:

How do I figure out what the negative ground wire is on my factory alarm? I have a voltmeter...

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 25, 2007 at 6:50 AM / IP Logged

Set alrm to 20vdc. Place red lead on constant 12v+. Arm alarm. one wire should give you a reading and stay whilst alarm is on. this is your armed output. Currently Orange on DEI product; light green on earlier (G4) Clifford.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 25, 2007 at 6:51 AM / IP Logged

Correction!! First 2 words should have read "Set DMM" Sorry 530t problem -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

530t problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.