remort start for 07 nissan titan

Home / the12volt's Install Bay / Car Security and Convenience / remort start for 07 nissan titan (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

gabet40

Member - Posts: 3

Joined: August 23, 2007

Location: United States

Posted: August 26, 2007 at 11:04 AM / IP Logged

my 07 titan has two starter wires, lt. green, and brown. the remote starter im installing (prestige 785) only has one starter wire, which i attached to the brown. how do i incorporate the lt. green wire to the remote start system?

Thanks in advance.

enice

Silver - Posts: 857

Joined: March 05, 2006

Location: New York, United States

Posted: August 26, 2007 at 11:51 AM / IP Logged

Use a relay , your prestige system may have an additional negative starter output. If it doesn't then use that starter wire from the 785 which is positve and tag it and connnect to relay. Do not connect together with the other or jump it directly to the other.

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: August 26, 2007 at 12:56 PM / IP Logged

Does the Prestege 785 have any negative secondary outputs for starter acc. and ign. ? These would be your triggers for the second starter that is needed. Give that a looksee, if not, then enice has the answer!

gabet40

Member - Posts: 3

Joined: August 23, 2007

Location: United States

Posted: August 26, 2007 at 3:51 PM / IP Logged

I found one auxiliary that sends a 300 mA ground output only during the crank. The manual says its sometimes used to activate the 'Crank Low/Bulb Test' in some vehicles or referred to as the ECM wake up wire in other vehicles.

Will this work?

enice

Silver - Posts: 857

Joined: March 05, 2006

Location: New York, United States

Posted: August 26, 2007 at 4:00 PM / IP Logged

if that wire only gives a ground pulse during crank and no other time then yes you would use that on pin 85 of the relay. 86 and 30 to 12v and last you would tag the 87 to the 2nd starter wire.

gabet40

Member - Posts: 3

Joined: August 23, 2007

Location: United States

Posted: August 26, 2007 at 4:39 PM / IP Logged

Thanks for your help. i'm more of a visual person so i drew up a little sketch on photoshop of what i think you explained. is there anyway i can send it or post it for you to check? (to reduce and attach it to this reply will make it too small to read)

enice

Silver - Posts: 857

Joined: March 05, 2006

Location: New York, United States

Posted: August 26, 2007 at 7:09 PM / IP Logged

just send me a pm and i'll send you give you my email address

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remort start for 07 nissan titan

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.