the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Pro Start 3300 Orane wire 10 pin connect


Post ReplyPost New Topic
< Prev Topic Next Topic >
bt3668 
Member - Posts: 13
Member spacespace
Joined: February 21, 2003
Posted: February 21, 2003 at 5:03 PM / IP Logged  
I am a little confused about the connection of this one wire. I have a 1997 Pontiac Grand Am. Is there a particular wire i should look for to connect this too? or just any negative wire? Any help will be much appreciatedPro Start 3300 Orane wire 10 pin connect -- posted image.
jrilla 
Gold - Posts: 1,498
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 19, 2002
Location: North Dakota, United States
Posted: February 21, 2003 at 5:40 PM / IP Logged  
I think that is the ground out when running wire? or when armed? I am not sure but that is what you use to trigger the starter kill relay if I am thinking about it right. If you have a three wire relay harness it should go to the orange wire and then the Red would go to the starter wire key side and white goes to the engine side of the starter wire along with the starter wire output from the 3300.
J Rilla
Owner/Installer
bt3668 
Member - Posts: 13
Member spacespace
Joined: February 21, 2003
Posted: February 21, 2003 at 5:40 PM / IP Logged  
Negative Ground  when armed and starting/running output. unsure of where this needs to be connected
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: February 21, 2003 at 7:05 PM / IP Logged  
The 3300 diagram that I have shows a P12 harness... not a P10 harness ? The ORANGE wire is the (-) parking light wire output.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
12voltlover 
Member - Posts: 16
Member spacespace
Joined: April 29, 2002
Location: United States
Posted: February 23, 2003 at 2:11 PM / IP Logged  
the orange wire on the 3300 is ground when running and when armed. you will need it for passlock bypass on your grand am. i think the 97 grand am used passlock 1 so i would recommend a dei 555L.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer