problem with magicar alarm

Home / the12volt's Install Bay / Car Security and Convenience / problem with magicar alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

silica

Member - Posts: 3

Joined: November 05, 2007

Location: Russian Federation

Posted: November 05, 2007 at 11:14 PM / IP Logged

Hi! I've got a trouble with magicar RF2W. It worked good for 1,5 years but now it doesn't close door locks and doesn't open. I downloaded manual from the site, but there is nothing about door locks. May I reprogramm it? Or anyhow do Anything?? Please HELP

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: November 06, 2007 at 10:59 PM / IP Logged

And the car would be.........?

silica

Member - Posts: 3

Joined: November 05, 2007

Location: Russian Federation

Posted: November 07, 2007 at 7:36 PM / IP Logged

Toyota Vista 1997 Diesel engine. Car body num. CV 400013415...

If failes to close/open door locks. Korean Magicar's office didn't reply. And here in Vladivostok we have no their representatives :((

KarTuneMan

Platinum - Posts: 7,056

Joined: December 14, 2004

Location: Isle Of Man

Posted: November 07, 2007 at 10:52 PM / IP Logged

Well, here in the U.S. we do not have the Vista. And I looked the car up, and it supposed to be very simular to the Camry. BUT, this poses a problem do we just guess?

I would take the car apart and trace things down to where they are supposed to be connected. I don't know what to tell you myself!

Maybe one of our Canadian guys can help..... I don't know if the car is there or not?

Here is the lock/unlock info for a Camry. See if it matches up AT ALL with your car.

LOCK

Lt.green

In driver's kickpanel

UNLOCK

Dk.green & Blue

In driver's kickpanel

The BLUE child safety-lock wire must be connected along with the DK.GREEN or the doorlocks will stop operating when the lock switch on the door is used. Isolate these 2 wires with 1N4001 diodes.

silica

Member - Posts: 3

Joined: November 05, 2007

Location: Russian Federation

Posted: November 07, 2007 at 11:42 PM / IP Logged

you were write - Vista and Camry are two sisters, two twins :) The door lock system matches

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

problem with magicar alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.