07 tacoma, clifford 50.0x

hello I am a noobe here and I just got my new clifford 50.0x. I want to install this on 07 tacoma DC without the remote start(I just want to use the alarm). my questions are: 1. which connectors do I have to connect or not connect (H1,H2,H3,H4,door lock, remote start). 2. well if I want to use the remote start, is DEI 1100x will work for 07 tacoma and I dont want to use my spare key. 3. Does anyone has the wire diagram for 07 tacoma DC. I researched and found it for the 05.

any help would appreciated. Thank you

     Security                                              WIRE          COLOR          POLARITY          LOCATION           Battery          WHITE/ RED          (+)          IGNITION SWITCH HARNESS           Ignition 1          BLACK/ RED          (+)          IGNITION SWITCH HARNESS           Starter 1          GREEN/ BLACK          (+)          IGNITION SWITCH HARNESS           All Door Trigger          BLUE          (-)          AT FUSE BOX BLACK 13 PIN PLUG PIN 9                     YOU MUST DIODE ISOLATE THESE TWO WIRES TO MONITOR ALL DOORS.            Domelight Super          BLUE          (-)          AT VEHICLE FUSEBOX           LF Latch          GREEN/ YELLOW          (-)          AT BECU 18 PIN PLUG PIN 7                     MUST DIODE ISOLATE EACH WIRE           RF Latch          RED / BLACK          (-)          AT BECU 22 PIN PLUG PIN 8                     MUST DIODE ISOLATE EACH WIRE           LR Latch          PINK/BLACK          (-)          AT BECU 18 PIN PLUG PIN 6                     MUST DIODE ISOLATE EACH WIRE           RR Latch          PINK/BLACK          (-)          AT BECU 18 PIN PLUG PIN 6                     MUST DIODE ISOLATE EACH WIRE           Alarm Disarm          DISARMS WITH UNLOCK          (-)          IGNITION SWITCH HARNESS                     THIS IS THE KEYSENCE WIRE, (-) TRIGGER WILL DISARM THE FACTORY ALARM WITHOUT UNLOCKING THE DOORS           Alarm Arm          ARMS WITH LOCK           Parking Lights          GREEN          (+)          AT VEHICLE FUSE PANEL           Low Crr Pk Lights          GREEN          (-)          AT LIGHT SWITCH                                          WIRE          COLOR          POLARITY          LOCATION           Battery          WHITE/ RED          (+)          IGNITION SWITCH HARNESS           Ignition 1          BLACK/ RED          (+)          IGNITION SWITCH HARNESS           Ignition 2          BLUE / YELLOW          (+)          IGNITION SWITCH HARNESS           Accessory 1          WHITE/ GREEN          (+)          IGNITION SWITCH HARNESS           Starter 1          GREEN/ BLACK          (+)          IGNITION SWITCH HARNESS           Starter 2          BLACK/ WHITE          (+)          IGNITION SWITCH HARNESS                 Key Sense          GREEN/ BLACK          (-)          IGNITION SWITCH HARNESS                     PULSE WITH GROUND DURING REMOTE START WILL DISARM FACTORY ALARM           Tachometer          BLACK/ WHITE          (AC)          AT DATA LINK CONNECTOR UNDER DRIVER DASH PIN 9                 Parking Lights          GREEN          (+)          AT VEHICLE FUSE PANEL                                 18 PIN PLUG - PIN #10           IMO          LIGHT GREEN/ BLACK           IMI          BLUE/WHITE           Modules                                              WIRE          LOCATION                               Module 1          THE BODY ECU IS ATTATCHED TO THE BACK OF THE FUSE BOX           Doorlocks/Windows                                              WIRE          COLOR          POLARITY          LOCATION           Power Unlock          GREEN/ BLACK          (-)          DRIVER KICK                     DOUBLE PULSE           PowerLock          VIOLET          (-)          DRIVER KICK                 Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).