commando rst 560, 97 dakota

Hello all,

I am installing a Commando RST-560 on a 97 Dodge Dakota with automatic trans and aftermarket Commando power locks.

the wiring diagram for my truck says that i have 2 accessory wires, and the instructions for the RST-560 says the following for the H1/6. Brown Wire –Accessory Output (Heater /AC Output)

There will often be more than one accessory wire in the ignition harness. The correct accessory

wire will power the vehicle’s climate control system. Some vehicle may have separate wires for the blower

motor and the air conditioning compressor. In such cases, it will be necessary to add a relay to power the second accessory wire.

So what exactly do I do, should I simply wire both accessory wires to the Brown H1/H6 wire? or do I only need to wire one of these wires in my case?

Hope this wrks thanks in advance for any help

How do I determine if the vehicle im woking on has +12volt switched parking lights, or ground switched parking lights?