high, low beam on at same time

Home / the12volt's Install Bay / Relays / high, low beam on at same time (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

rj8a

Member - Posts: 3

Joined: September 09, 2012

Location: New Mexico, United States

Posted: September 13, 2012 at 10:49 PM / IP Logged

I have a 99 gmc and would like to hook up relays so that my low beams turn on with my high beams. Would like a diagram to show me how. Thank you.

Rj8a

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 14, 2012 at 1:51 AM / IP Logged

This shows a relay in column loom after hi-low switch.

Notes:-

a)Caution this shows POS (+) feed at the switch*, some vehicles, e.g. Toyota have NEG (-) switching, TEST.

b)You may require two relays, one for each side.

Here's the diagram. hi-lo_1.bmp

Parts:-

One standard relay Bosch/Tycho cube style 5 pins.

One diode 1N4004 across 85 and 86, band to 86.

Fuse 15, not 20 as shown,spur from hi beam to 86.

*By switch I assume your hi low switch and flasher are on the indicator stalk.

rj8a

Member - Posts: 3

Joined: September 09, 2012

Location: New Mexico, United States

Posted: September 14, 2012 at 2:13 PM / IP Logged

Thank you. i will get back to you and post results.

Rj8a

rj8a

Member - Posts: 3

Joined: September 09, 2012

Location: New Mexico, United States

Posted: September 21, 2012 at 12:25 AM / IP Logged

This worked out Wonderful

, just as i wanted. thank you again.

Rj8a

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 21, 2012 at 1:34 AM / IP Logged

Good, glad to be of help.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

high, low beam on at same time

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.