Two Switches to One Relay?

Home / the12volt's Install Bay / Relays / Two Switches to One Relay? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Gsrpwr704

Member - Posts: 1

Joined: October 13, 2002

Location: United States

Posted: March 03, 2005 at 9:58 AM / IP Logged

Hey guys, I was wondering if it is possible to wire a relay with two switches so if I was to flip one switch to turn something off, then I can go to the other switch to turn it back on. It would be kinda like a switch at the bottom of a stairway and a switch at the top. So that you can turn the light on and off from either upstairs or downstairs.

Any help would be greatly appreciated

ff-mike

Copper - Posts: 199

Joined: November 15, 2004

Location: United States

Posted: March 04, 2005 at 2:03 PM / IP Logged

Very easy to do

You would need 2 spdt switches. Connect the outer 2 terminals on the switches to each other. The middle terminal on switch 1 goes to power, the middle terminal on switch 2 goes to the load

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Two Switches to One Relay?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.