the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Horn Question


Post ReplyPost New Topic
< Prev Topic Next Topic >
djmax 
Member - Posts: 2
Member spacespace
Joined: July 10, 2005
Location: Mexico
Posted: October 17, 2005 at 9:22 PM / IP Logged  

hi all this is my first Time in this forum and is nice i like the web page.

First Sorry if My inglish is bad i am from Mexico.

MY Q? is this.

I have a Car Alarm a Viper and i Change the Alarmar Horn and is not sow loud like the last one.

and i chek and is a 6v to 12v the new horn. i check whit a voltimeter and the alarm givme 6 Volts when the alarm is arm and makin the 6 tons. my Q? is can i use a Relay soy when the 6v activate the relay give 12volt to the new horn and it sound Loud??

I Hope you can help me Tnx

KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: October 17, 2005 at 9:51 PM / IP Logged  

yes you can do that.....

pin 86 to ground, pin 87 gets 12volts, pin 85 gets the trigger from your alarm, pin 30 goes to your siren horn...

BUT...why is your alarm siren wire only 6volts?

Good luck

djmax 
Member - Posts: 2
Member spacespace
Joined: July 10, 2005
Location: Mexico
Posted: October 18, 2005 at 6:28 PM / IP Logged  
djmax wrote:

hi all this is my first Time in this forum and is nice i like the web page.

First Sorry if My inglish is bad i am from Mexico.

MY Q? is this.

I have a Car Alarm a Viper and i Change the Alarmar Horn and is not sow loud like the last one.

and i chek and is a 6v to 12v the new horn. i check whit a voltimeter and the alarm givme 6 Volts when the alarm is arm and makin the 6 tons. my Q? is can i use a Relay soy when the 6v activate the relay give 12volt to the new horn and it sound Loud??

I Hope you can help me Tnx

PS:

Hi i dont know but is a 6V 10Wats the new is 6 to 12V 30wats :-) whit 6v souns like the old whit 12v Direct to  the Batery souns sou Hard al my freands whants one hahahaha

i live you a link  whit a digram i make tellme if is correct tnx for the help

http://www.dj-factory.net/max/relay.jpg


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, June 7, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer