on button Window roll down

Home / the12volt's Install Bay / Relays / on button Window roll down (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

emperor

Member - Posts: 1

Joined: October 07, 2006

Location: United States

Posted: October 07, 2006 at 1:29 PM / IP Logged

IS there or does anyone know how to wire it up so that when you press the window switch down once, it rolls window all way down. Or do i need a module or some other setup? i would be using this setup on a 3 wire 1960s window switch using dual relays(Actuators / Reverse Polarity setup) for a newer 5 wire pwr window setup. Thanks

master5

Silver - Posts: 1,123

Joined: October 10, 2006

Location: United States

Posted: October 10, 2006 at 4:28 AM / IP Logged

You have to use a module since a relay/timer setup is unsafe, although cheaper. I know all of the newer DEI window modules have the one touch feature built in and are not that expensive. They are also very simple to install with all circuit types and have switches which allow you set the current for the wiring type and system demands.

kreativesailor

Member - Posts: 28

Joined: August 18, 2005

Location: United States

Posted: October 22, 2006 at 11:13 AM / IP Logged

Here is a cheap way of doing your own One touch down window.

https://www.the12volt.com/installbay/forum_posts.asp?tid=74159&KW=One+Touch+down

Be advised you will have to use one module per window.

You can try and fail but dont fail to try...

Search for other posts by kreativesailor

bowez

Member - Posts: 11

Joined: October 31, 2006

Posted: November 05, 2006 at 4:47 PM / IP Logged

Noticed using the module form a Ford is there a part number to make get them easier?

master5

Silver - Posts: 1,123

Joined: October 10, 2006

Location: United States

Posted: November 05, 2006 at 5:25 PM / IP Logged

Note on the ford module... that link is a way to make the passanger window one touch if you already have the driver. So basically you would need one of those mods for each window. If you request a part # you are probably considering getting it from ford.

Well even if only doing 2 windows those ford modules new are probably alot more expensive then using an aftermarket window module..which automatically do one touch on both windows..no need to rig anything..

If you can\t find those ford mods in a junk yard don't even bother with them. IMO not really a saving any money and may be more difficult to install. Plus if you get a used one you have to wonder why it's for sale if it works.

You never know with electronics from a junk yard, have had lots of bad experiences.

killer sonata

Silver - Posts: 718

Joined: May 17, 2006

Posted: November 05, 2006 at 6:26 PM / IP Logged

dei 530T one for each pair of windows

master5

Silver - Posts: 1,123

Joined: October 10, 2006

Location: United States

Posted: November 05, 2006 at 10:10 PM / IP Logged

That'll do it Killer

bowez

Member - Posts: 11

Joined: October 31, 2006

Posted: November 06, 2006 at 5:42 PM / IP Logged

Reason I asked for the Ford pn is I may be able to source a cheap OEM source.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

on button Window roll down

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.