relay to activate starter at low voltage?

Home / the12volt's Install Bay / Relays / relay to activate starter at low voltage? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

offroadzj

Gold - Posts: 2,043

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: June 03, 2005

Location: New York, United States

Posted: November 18, 2007 at 9:50 PM / IP Logged

I did a quick search, but didnt really find what I was looking for. Is there a relay, or setup out there that I can put inline with my r/s so that if the voltage every drops below say 9volts then it activates the r/s? If I can find the relay, I can use the activation input of the r/s to start the truck. This way if for some reason my battery ever gets low, instead of it dying, it will automatically r/s the truck.

Thanks

Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

8520

Member - Posts: 11

Joined: August 28, 2007

Location: Washington, United States

Posted: November 26, 2007 at 2:42 PM / IP Logged

What r/s unit do you have? I know that many dei units have a "cold-sense" mode built in, it's just never something I've seen anyone hook up here.

Lots of diamond audio and clifford junk :P

offroadzj

Gold - Posts: 2,043

Joined: June 03, 2005

Location: New York, United States

Posted: November 27, 2007 at 9:00 PM / IP Logged

python 871xp

Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

relay to activate starter at low voltage?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.