2008 dodge ram alarm wiring

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2008 dodge ram alarm wiring (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

acboomer1

Member - Posts: 2

Joined: October 09, 2008

Location: Maine, United States

Posted: October 09, 2008 at 7:55 AM / IP Logged

wiring info for 2008 Dodge Ram 1500 Big Horn. car alarm and remote start. extra items needed or to make install easier

ckeeler

Gold - Posts: 1,461

Joined: June 20, 2008

Location: New Mexico, United States

Posted: October 09, 2008 at 9:09 AM / IP Logged

RAM FULL SIZE PICKUP

2007 -2008

KEY		IMMOBILIZER
N/A	N/A	Transponder Anti-theft PK3 + requires bypass module

PART	COLOR	LOCATION
12 VOLT CONSTANT	LIGHT BLUE/RED (+)	IGNITION SWITCH HARNESS
STARTER	YELLOW/GRAY ( NOT FOR REMOTE START )	IN GRAY PLUG NEAR BATTERY
STARTER 2	PURPLE / BROWN (-) see note *
IGNITION 1	PINK/WHITE (+)	IGNITION SWITCH HARNESS
IGNITION 2	N/A	N/A
IGNITION 3	N/A	N/A
ACCESSORY /HEATER BLOWER 1	PURPLE / BROWN (-) see note *
ACCESSORY /HEATER BLOWER 2	N/A	N/A
KEYSENSE	N/A	N/A
PARKING LIGHTS ( - )	N/A	N/A
PARKING LIGHTS ( + )	WHITE/ YELLOW AND WHITE/ GRAY	LOW IN DRIVERS KICK PANEL
POWER LOCK	PURPLE / DARK GREEN (-) SEE DIAGRAM	REQUIRES 820 OHM RESISTOR
POWER UNLOCK	SAME AS LOCK WIRE	REQUIRES 330 OHM RESISTOR
LOCK MOTOR WIRE	LIGHT GREEN	IN DRIVERS KICK PANEL
DOOR TRIGGER	SEE NOTE **	LARGE GRAY PLUG IN KICK PANELS
DOMELIGHT SUPERVISION	YELLOW/LIGHTBLUE ( + )	IN DRIVERS A PILLAR
TRUNK RELEASE	N/A	N/A
SLIDING POWER DOOR	N/A	N/A
HORN	DARKGREEN/ PURPLE (-)	IN STEERING COLUMN HARNESS
TACH	DARKBLUE/GRAY SEE NOTE ***	AT PCM
WAIT TO START LIGHT	N/A	N/A
BRAKE	WHITE/ TAN (+)	AT SWITCH ABOVE BRAKE PEDAL
FACTORY ALARM DISARM	DISARMS WITH FACTORY REMOTE ONLY	N/A
ANTI-THEFT	TRANSPONDER ANTI-THEFT	AT IGNITION TUMBLER

NOTES

NOTE * THIS VEHICLE HAS A SPECIAL IGNITION THAT REQUIRES A BYPASS MODULE. THE MODEL NUMBER OF THE MODULE WOULD BE A PKUCH2GX. THIS MODULE TAKES CARE OF THE IGNITION AND ANTI-THEFT IN VEHICLE.

NOTE ** THE LEFT FRONT DOOR IS PURPLE IN PIN 1. THE RIGHT FRONT DOOR IS PURPLE / WHITE IN PIN 4. THE LEFT REAR DOOR IS PURPLE / ORANGE OR PURPLE /GRAY IN PIN 2. THE REAR DOOR IS PURPLE / YELLOW OR TAN / YELLOW IN PIN 3. USE ALL 4 WIRES AND DIODE ISOLATE EACH WIRE FROM EACH OTHER AND THE INSTRUMENT CLUSTER.

NOTE*** THE PCM IS ON THE PASSENGER SIDE FIRE WALL .

acboomer1

Member - Posts: 2

Joined: October 09, 2008

Location: Maine, United States

Posted: October 09, 2008 at 9:34 AM / IP Logged

Thanks, should be a smooth transistion

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2008 dodge ram alarm wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.