1997 bmw immobilizer wiring diagram

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 1997 bmw immobilizer wiring diagram (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

petka6

Member - Posts: 2

Joined: February 17, 2009

Posted: February 17, 2009 at 8:38 AM / IP Logged

I have the engine of BMW (1997 year, 2,3 van) with engine harnes and ECM. The problem is, that wires of EWS II(immobilizer) connector are cuted off, so i dont know where they must be connected to. I had a look in many of BMW manuals, but unfortunately there wasn't EWSII wiring diagram (with wires colors and pins numbers). Any suggestions and advices will be wellcomed.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 17, 2009 at 3:59 PM / IP Logged

EWS doesn't connect directly that module, it goes to a ciggie sized pack undefr the inst. panel which then feeds to the management etc.

petka6

Member - Posts: 2

Joined: February 17, 2009

Posted: February 18, 2009 at 1:36 AM / IP Logged

Is it possible to run engine if I only have EWSII, Key with transponder, transmiter/receiver module, ignition switch with coil. If no, what else should I have (DME, etc.)

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1997 bmw immobilizer wiring diagram

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.