2013 Mazda CX5, Door Lock Wiring

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2013 Mazda CX5, Door Lock Wiring

Welcome Guest :)

Members

< Prev Topic Next Topic >

yellow300zx955

Member - Posts: 3

Joined: May 19, 2019

Location: Virginia, United States

Posted: May 19, 2019 at 5:25 PM / IP Logged

Hi,

I am wiring a remote car starter from Directed Electronics Model 4113r. The remote strat works fine but I am having trouble with the door lock function. The wiring diagram says to look for a blue/white wire in the driver kick paner or the LR quarter BCM. I can not seem to find the right wire. When I unplug one of the harnesses from the rear BCM this does kill the door locks however I dont see the color wired specified. I did find a couple blue/white wires near the driver side kick panel but they do not affect the door locks. Also the wiring diagram says the cx5 door lock system is a one wire system negative 1000ohms to lock.

Search for other posts by yellow300zx955

i am an idiot

Platinum - Posts: 13,708

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: May 19, 2019 at 6:32 PM / IP Logged

Are you looking in the harness that is running to the rear of the vehicle?

yellow300zx955

Member - Posts: 3

Joined: May 19, 2019

Location: Virginia, United States

Posted: May 20, 2019 at 6:05 PM / IP Logged

I am looking in one of two areas as specified by the wiring layout. In the driver kick panel or the BCM in the left rear of the car. When I cut the blue with white wire in the kick panel the locks still work so that cant be the right wire. At the BCM I dont see a blue with white wire but when I unplug the wire harness the power locks do stop working.

geepherder

Platinum - Posts: 3,668

Joined: October 27, 2003

Posted: May 21, 2019 at 2:48 AM / IP Logged

Sit in the car and lock it using the factory remote. After waiting 60 seconds, see if the door lock switches work while the factory alarm is set. If they do, check the wiring at one of the switches.

After looking online, it seems the driver's side switch is built into the same unit as the power window switch. If you can't find what you need in the wire bundle there, check the passenger side switch.

My ex once told me I have a perfect face for radio.

yellow300zx955

Member - Posts: 3

Joined: May 19, 2019

Location: Virginia, United States

Posted: May 23, 2019 at 8:10 AM / IP Logged

Ok I will try this today and get back to you.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.