96 pontiac bonniville se wiring codes

HEY ROOM,

WONDERING IF ANYONE COULD HELP ME IN GETTING THE WIRING COLOR CODES FOR MY CAR 96 PONTIAC BONNIVILLE SE. INSTALLING A VIPER 550 WITH REMOTE START. 

ALSO ASKING IF THE DOOR TRIGGERS NEED TO BE DIODE ISOLATED? WHICH DIODE TO USE? THIS WOULD BE A 3 WIRE NEGATIVE DOOR LOCK SYSTEM CORRECT? TRUNK RELEASE HOOK UP? DOES THIS ALARM HAVE TO TAP INTO THE NEUTRAL SAFETY AT THE STARTER ENABLE RELAY? LAST, IF ANYONE COULD PROVIDE A DIAGRAM FOR WINDOW ROLL UP AND DOWN. I WILL HAVE TO GET TWO ROLL UP MODULES FOR THIS CORRECT(529T)?

THANKS

THANKS

Not sure if the Bonneville uses a central door trigger system or not, but just hook up the driver door pin switch wire and test to see if all the other doors when open produces voltage through the driver pin switch wire.If not then a  4001N ( 1 amp )  diode will have to be installed in all the other doors wires that do not activate the when the door is opened. The Bonneville uses a Type A 3 wire negative door lock system , you are correct. Very basic and no need for relays.

When you purchase the DEI window roll modules( one modules control 2 windows up and down ) , there will be a diagram with the unit and instruction. You can go here for the required wires for the windows for the Bonneville: https://www.the12volt.com/installbay/detail.asp?info=alarm&year=1996&make=Pontiac&model=Bonneville&ID=18757&type=Alarm