2000 GMC Jimmy...555L Help

Hi guys, I installed a Viper 790xv remote starter/alarm. I using a DEI 555L to bypass the "passlock II" system. I followed the instructions to program it and the 555L still does not work. I can start the vehicle with the key, activate the remote starter, take out the key and the vehicle will stay running. If I try to remote start the vehicle with the vehicle off it will not start. The 555L is connected : 555L Module wires are on left side red wire to 12volt+ Black wire (ground)-----> ORANGE / black wire yellow wire-------> cut yellow wire towards key side in vehicle BLACK / YELLOW wire ------> cut yellow wire away from key blue/black wire -------> Blue status output wire from alarm module Pink wire --------> Pink Heavy guage IGN wire of remote starter harness I dont know why its not working. Any help would be greatly appreciated

From what I can see, your blue/black is hooked up to the wrong wire, it needs to go to the blue/black 2nd/3rd ignition ouput. The ground wire may be wrong.Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

also not hooking up a second ignition would render the same symptoms, just a thought