
99 accord wiring
Welcome Guest :)
BaggedTruck
Member -
Posts: 16
Joined: April 12, 2004
Location: United States
Posted: April 14, 2004 at 12:13 PM / IP Logged
Can anyone refer me to a wiring diagram for a 99 accord?
thanx
Nick
boomer_106
Silver -
Posts: 710
Joined: November 25, 2003
Location: United States
Posted: April 15, 2004 at 7:32 AM / IP Logged
Here ya go Nick.
Remote Starter Wiring Colors and Notes |
Function | | Vehicle Color | Location |
Start: | | BLACK/ WHITE | IGNITION SWITCH HARNESS ** |
Ignition #1: | | BLACK / YELLOW | IGNITION SWITCH HARNESS |
Ignition #2: | | YELLOW | IGNITION SWITCH HARNESS |
Ignition #3: | | | |
Accessory: | | WHITE/ BLACK | IGNITION SWITCH HARNESS |
Brake Light: | | WHITE/ BLACK | AT SWITCH ABOVE BRAKE PEDAL |
Tach Signal: | | BLUE | AT COIL MODULE |
Parking Lights: | | RED / BLACK | AT FUSE BLOCK ON DRIVER'S SIDE |
Headlights: | | | |
OEM Alarm Disarm: | | BLUE | INSIDE OF DRIVER'S DOOR |
OEM Alarm Arm: | | BLUE/WHITE | INSIDE OF DRIVER'S DOOR |
Diesel Glow Plug: | | | |
Clutch Bypass Wire: | | | |
Notes: | | * This vehicle is equipped with a transponder immobilizer system; See Installation Note #144 - Bypassing Transponder Theft Systems. |
Alarm and Keyless Entry Wiring Colors and Notes |
Function | | Vehicle Color | Location |
Constant +12 Volts: | | WHITE | IGNITION SWITCH HARNESS |
Starter Kill: | | BLACK/ WHITE | IGNITION SWITCH HARNESS ** |
Ignition +12 Volts: | | BLACK / YELLOW | IGNITION SWITCH HARNESS |
Dome Lights/Superv: | | BLACK/ WHITE (-) | 4 PIN GREEN CONN. IN PASS FUSE BOX |
OEM Horn: | | BLUE/GREEN (-) | IN STEERING COLUMN HARNESS |
Power Lock: | | BLACK/ BLUE (-) | PASSENGER SIDE FUSE BOX** |
Power Unlock: | | ORANGE (-) | PASSENGER SIDE FUSE BOX** |
Trunk Release: | | WHT/RED+ | # PIN GRAY CONN. ABOVE DRIVER'S KICK |
Alarm Input Wire: | | BLACK/ WHITE (-) | 4 PIN GREEN CONN. IN PASS FUSE BOX |
Notes: | | ** See Note#201 Negative Trigger Door Locks |
accordium
Member -
Posts: 1
Joined: April 29, 2004
Posted: April 29, 2004 at 1:10 AM / IP Logged
Not trying to jack the thread but what exactly does the "Alarm Input Wire" do?
Follow the12volt.com
Wednesday, May 14, 2025
• Copyright © 1999-2025 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.