VSS for a 1993 Infiniti J30

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / VSS for a 1993 Infiniti J30 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

metaverse

Copper - Posts: 210

Joined: June 13, 2002

Location: United States

Posted: October 18, 2004 at 4:54 PM / IP Logged

Anybody ? Thanks in advance..stuck while installing a pioneer Navi Sys 910 (avic 80 DVD) Also if possible the reverse signal input.. Thanks again..

metaverse

Copper - Posts: 210

Joined: June 13, 2002

Location: United States

Posted: November 10, 2004 at 4:18 PM / IP Logged

Reverse gear signal input for J30 is located at Pin 20 on the Auto Trans ECU located at driver's kickpanel..right in the fusebox area in the car. It is a think red wire which shows 12 volts in reverse gear on the transmission.

metaverse

Copper - Posts: 210

Joined: June 13, 2002

Location: United States

Posted: November 12, 2004 at 10:51 PM / IP Logged

VSS is located on on the gauge console. yellow/blue cable on the white 8 pin connector..plugged in at a slight angle. You can use the other wire as well..black I believe..

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

VSS for a 1993 Infiniti J30

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.