Need Wiring Diagram For 1999 Dodge Caravan
Welcome Guest :)
ronzer
Member -
Posts: 5
Joined: November 18, 2002
Location: United States
Posted: November 18, 2002 at 3:50 PM / IP Logged
Need Wiring Diagram For 1999 Dodge Caravan so I can install alarm.
Tryder
Member -
Posts: 11
Joined: November 10, 2002
Location: United States
Posted: November 18, 2002 at 8:02 PM / IP Logged
Give me your email and i will email it to you!!
Tryder
Tryder
Member -
Posts: 11
Joined: November 10, 2002
Location: United States
Posted: November 18, 2002 at 8:03 PM / IP Logged
Velocity Motors
Moderator -
Posts: 12,488
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: November 19, 2002 at 12:52 AM / IP Logged
| ITEM | WIRE COLOR |POL| WIRE LOCATION |
| 12V|red |+ |ignition harness || STARTER|yellow |+ |ignition harness || IGNITION|blue |+ |ignition harness || SECOND IGNITION|BLACK/ orange |+ |ignition harness || ACCESSORY|BLACK/ white *1 |+ |ignition harness || POWER LOCK|WHITE/ green |*2 |left plug at bottom of fuse || POWER UNLOCK|same wire |*2 |box under cover (1 of 3) || LOCK MOTOR|brown | |*3 || UNLOCK MOTOR|BLACK/ pink | |*3 || DISARM DEFEAT|violet/white | |*3 || PARKING LIGHTS +|do NOT use | | || PARKING LIGHTS -|grn/wht or grn/red | |at light switch *4 || HEADLIGHTS|lt. GREEN/ orange |- |at light switch || DOOR TRIGGER|BROWN / lt. green *5 |- |dome light on/off sw. || TRUNK/HATCH PIN|tied in with doors | | || HOOD PIN|pink/black |- |underhood light || FCTRY ALARM ARM|arms with lock | | ||FCTRY ALRM DISARM|disarms with unlock | | || DISARM NO UNLOCK|see directfax #1081 | | || TACHOMETER|gray or gray/red | |ignition coil || BRAKE WIRE|WHITE/ tan |+ |brake switch || HORN TRIGGER|gray/orange |- |top right plug of fuse box || WIPERS|pink/purple |- |steering column || LF WINDOW UP/DN|lt. green - white |A |drivers door switch || RF WINDOW UP/DN|brown - purple |A |drivers kick panel || LR WINDOW UP/DN|dk. blue - red |A |drivers kick panel || RR WINDOW UP/DN|gray - dk. green |A |drivers kick panel |Notes:
*1 Not required for remote start. *2 Use relays and set up for negative trigger. Place a 4020 ohm resistor inline on the lock output, and a 665 ohm resistor inline on the unlock output. If you don't have a factory security system use a 1500 ohm for lock and a 250 ohm for unlock. *3 The door lock motor wires are located in the top left plug at the relay/fuse box under the drivers side of the dash. *4 If the van has "auto lamps", see direct fax document # 1080 *5 For dome light supervision, use BROWN / white at the dome light on/off switch on the dash.Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Follow the12volt.com
Monday, July 14, 2025
• Copyright © 1999-2025 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
Topic Closed)
Members
Search
Register
Login
Printable version
