Fried Monitors?

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / Fried Monitors? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

AudioBAHNvlcm

Copper - Posts: 209

Joined: February 19, 2003

Location: United States

Posted: July 10, 2003 at 8:54 PM / IP Logged

When i was getting my monitors hooked up in my truck, they guy accidentally hooked up the power ( ign.) to the ground (on the monitor), and now it doesnt work, did this fry the monitors, or is there a way to fix them??

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: July 10, 2003 at 10:01 PM / IP Logged

Well you definately could have fried them. As a last resort/hope you could pull them apart and check to see if there is an internal fuse or if you just blew a cap off of the board. This is why they invented FUSES!

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

AccordInspire

Member - Posts: 16

Joined: June 30, 2003

Location: United States

Posted: July 11, 2003 at 4:19 PM / IP Logged

damn that sounds pretty serious... I think you need to do some ass whoopin cause its a goner.

Well i'm not sure but auex could be right one the fuse issues you might be able to replace it or see if the LCD company can replace it since you still have warrenty on it (do you?) well I say warrenty first before you strip it.

AudioBAHNvlcm

Copper - Posts: 209

Joined: February 19, 2003

Location: United States

Posted: July 12, 2003 at 9:33 PM / IP Logged

Its all good now, the warrenty covered it, and i got 2 new ones. so its all good. i just wont let that f**ker touch em this time, haha. thanks for all the help though

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Fried Monitors?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.