Avic-n1 in 2004 dodge ram

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / Avic-n1 in 2004 dodge ram (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bostondude

Member - Posts: 5

Joined: October 06, 2005

Location: Afghanistan

Posted: October 06, 2005 at 4:51 PM / IP Logged

hey guys 1st timer here. need some help from other installers.i have the avic-n1 and need to know where to locate and hook up the VSS and Reverse wires on my 2004 dodge ram 1500 w/auto transmisson.seen lots of posts,but none shows or descibes the place they go. some posts even have different color wires.please help.would like to hook up these under hood.not run a wire to the rear for reverse light.thanks in advance.

extreme1

Silver - Posts: 1,070

Joined: February 12, 2003

Location: Canada

Posted: October 06, 2005 at 11:45 PM / IP Logged

VSS dk GREEN/ YELLOW ac pin 13. blk plug, pcm PCM on passenger firewall. VSS on diesel is pin 11, 50-pin plug, at PCM lower driver's side of engine.

Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

bostondude

Member - Posts: 5

Joined: October 06, 2005

Location: Afghanistan

Posted: October 07, 2005 at 7:41 PM / IP Logged

thanks for the help, i have seen something like this on here. the only thing is that the dark green w / YELLOW wire is #30 on the connector and according to dodge thats the 2c pressure switch. they are saying that #32 that is dark green w/brown in the #32 position is the output speed sensor. and also any help on which wire to use for my reverse wire hookup? still confused. thanks again in advance.

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: October 07, 2005 at 8:05 PM / IP Logged

VSS Wire: LOCATION 11

4 CONNECTOR ECM - RIGHT GREEN CONNECTOR POSITION 32
MANUAL 3 CONNECTOR ECM BLACK CONNECTOR POSITION 13

VSS Wire Color: AUTOMATIC LT. GREEN / WHITE or GREEN/ BROWN, MANUAL WHITE/ ORANGE or GREEN/ YELLOW

VSS Pulse: AUTOMATIC 38,600 MANUAL 8000

VSS Tach Wire: IF MANUAL TRANSMISSION USE CLUTCH SWITCH 250-4206

Tach Signal Wire Color: WHITE/ BLACK

Brake Switch Positive: PINK/BLUE

Brake Switch Negative: WHITE/ TAN

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

bostondude

Member - Posts: 5

Joined: October 06, 2005

Location: Afghanistan

Posted: October 09, 2005 at 10:12 AM / IP Logged

how about where to hook up the reverse wire? is it under the hood,or do i have to go all the way to the rear and tap off the tailights? i am hoping to stay under the hood with this wire aswell. thanks again.

extreme1

Silver - Posts: 1,070

Joined: February 12, 2003

Location: Canada

Posted: October 10, 2005 at 2:24 PM / IP Logged

bostondude wrote:

REVERSE WHITE/ lt. green + inside mirror or plug by pcm The PCM is on the passenger side firewall.

Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

bostondude

Member - Posts: 5

Joined: October 06, 2005

Location: Afghanistan

Posted: October 10, 2005 at 2:44 PM / IP Logged

wheres the mirror they are talking about? inside the mirror? any help on this one?

dstang24

Copper - Posts: 98

Joined: September 06, 2005

Location: United States

Posted: October 11, 2005 at 5:38 PM / IP Logged

Avic-n1 in 2004 dodge ram -- posted image.

This is my 2004 Dodge ram 1500 AT... I installed the N2 recently... both the VSS and the Reverse wire are by the PCM. I have a picture of my install. The wire on the right is the VSS wire (solder & tape) while the one on the left (in the t-tap, got lazy) is the reverse wire, which is only hot when the vehicle in RUNNING and in reverse. Again, the engine must be turned over to make this wire go hot.

REVERSE : White w/ light green BY (next to) the PCM -- it was on the front bumper side of the plug that's on the fender there...

VSS: Dark Green w/ Yellow IN (connected to) the PCM

bostondude

Member - Posts: 5

Joined: October 06, 2005

Location: Afghanistan

Posted: October 12, 2005 at 11:08 AM / IP Logged

thats what i am talking about DSTANG. pictures tell the whole story. thanks. you never need any help let me know, i got your back. thanks everybody for all your help.and i look forward to helping and being helped in the future.

jokersmith

Member - Posts: 3

Joined: November 04, 2005

Location: United States

Posted: November 04, 2005 at 4:45 PM / IP Logged

Ok guys, thats great info. I tried it on my 2005 Dodge ram, but my problem is, is when the VSS is hooked up I cannot watch movies on the go. If I'm stopped at a light the movie will come on and when I start to go it will go blue and all I hear is voice. Another question, the brain unit is under my center seat and the antenna connects to that, but I bought a longer 12 foot extension antenna from Circuit City and used that, but my radio stations don't come in very well. Any suggestions?

Thanks for the help.

2005 Ram Quad Cab, Chrome nerf bars, chrome Mopar fuel door, Mopar chrome billet grill, mopar chrome air deflector, white face A/C guage, side windows tinted 20%, chrome altezza taillights, K&N FIPK,

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Avic-n1 in 2004 dodge ram

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.