exhaust valve creation

Home / the12volt's Install Bay / General Discussion / exhaust valve creation (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

leahmc28

Member - Posts: 6

Joined: October 02, 2010

Location: Ontario, Canada

Posted: October 02, 2010 at 2:37 PM / IP Logged

I am attempting to make a dual exhaust that has a motor and a flap that will switch from side to side, any suggestions for motor types? I know I'm incoporating a Smart Relay so i know its going to be a 12-24VDC motor but I am unsure if there is a certain kind used for valves.

Thanks for any help!

lspker

Silver - Posts: 503

Joined: November 23, 2003

Location: Canada

Posted: October 03, 2010 at 10:02 PM / IP Logged

You can get electronic solenoid exhaust cut outs at most performance shops. Summit or autolock has then.

leahmc28

Member - Posts: 6

Joined: October 02, 2010

Location: Ontario, Canada

Posted: October 19, 2010 at 8:03 PM / IP Logged

I have researched that but for what I'm designing I need something that will guarantee 100% exhaust flow through either one pipe or the other, the issue with cutouts is that they will open up flow but will not restrict flow to the full exhaust system. The only issue I am having is creating a design which is visually pleasing and waterproof.

oldspark

Gold - Posts: 4,913

Joined: November 03, 2008

Location: Australia

Posted: October 19, 2010 at 8:20 PM / IP Logged

So its a single actuator change-over design.

Get to it!

Whether you use a stepper motor or armed-solenoid or magnetics etc comes after the valve design.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

exhaust valve creation

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.