wiring in capacitor?

Home / the12volt's Install Bay / General Discussion / wiring in capacitor? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

topfridgeman

Member - Posts: 1

Joined: August 08, 2003

Location: United Kingdom

Posted: August 08, 2003 at 12:24 PM / IP Logged

how do you wire it in correctly , parallel,or in line series with 12v in to amp???can't seem to find a wiring diagram online.

proper bo I tell thee!!

Back to Top

kidtransam

Copper - Posts: 99

Joined: November 08, 2002

Location: United States

Posted: August 08, 2003 at 3:38 PM / IP Logged

There is a Positive side and Negative side to the Cap...run the power wire from the battery to the POSITIVE side of the cap...and run the power wire from the POSITIVE side of the cap to the amp...then run the ground wire (same gauge as the power wire) to a good solid ground.

It will probably have to be charges first..some don`t have to be charged..but if it does, you will need the card, or resistor that goes with it.

With a torch and a big enough hammer...it WILL friggin fit!!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

wiring in capacitor?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.