2000 Hyundai Elantra Floor Jacking Point

Home / the12volt's Install Bay / General Discussion / 2000 Hyundai Elantra Floor Jacking Point (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jackyhi

Member - Posts: 5

Joined: October 16, 2003

Posted: March 04, 2004 at 12:12 PM / IP Logged

I want to use a hydraulic floor jack to lift my 2000 Hyundai Elantra, and then put a pair of Jack Stands on both side. I only know the jacking point for scissor jack on the both side of car. Does anybody know the hydraulic floor (trolley) jacking point of 2000 Hyundai Elantra?

can_wrench

Member - Posts: 6

Joined: March 02, 2004

Location: Canada

Posted: March 06, 2004 at 4:55 PM / IP Logged

Use the lip on the under side of the car just be carfull that you do not bend the lip. OR you can use the front frame of the car under driver and pass floor. and the lips on the back if it has control arms on the back you can use the mounts there.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 Hyundai Elantra Floor Jacking Point

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.