Fuse box help

Home / the12volt's Install Bay / General Discussion / Fuse box help (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

accord_customiz

Member - Posts: 21

Joined: June 08, 2004

Posted: June 20, 2004 at 11:34 PM / IP Logged

hi all.

i got a 94 accord lx. and i bought an underbody neon kit. I got an empty fuse terminal in the box but i dont know how to run wires from that fuse terminal. how to i access wires going to and from the fusebox. and also the fuse terminal hasnt been used so would the terminal have to be hot. i dont know. any help would be appreaciated.

Search for other posts by accord_customiz

Thack79

Silver - Posts: 526

Joined: December 02, 2003

Location: Virginia, United States

Posted: June 22, 2004 at 6:43 AM / IP Logged

Too complicated. Id just come thru the fire wall from the battery. If you want to be able to have it on while the car is off then it would need to be hot or you can just run a relay off your door trigger to have them come on when you open the door. I had to do rerun some wire in the fuse box when one of my wires melted out and id just avoid it completely. Just my 2 cent

accord_customiz

Member - Posts: 21

Joined: June 08, 2004

Posted: June 22, 2004 at 1:13 PM / IP Logged

thanks alot man i ran it thru firewall mounted the switch and did it to the battery. i made it clean and wow do those things glow.

thnx again

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Fuse box help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.