12V accessory source.

Home / the12volt's Install Bay / General Discussion / 12V accessory source. (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

my_Wang

Member - Posts: 4

Joined: October 28, 2004

Location: Canada

Posted: December 03, 2004 at 2:27 PM / IP Logged

I was wondering what i could use as a 12V source (ignition/acessory only) to power my heated seats when only the car is on. I will be controlling them with a master on/off swich, but only on when the car/ accessories are on. If it helps to narrow it down, the heater draws 2A maximum @12.4V and the vehicle is a 1995 Monte Carlo. Thanks for the help in advance.

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: December 04, 2004 at 12:25 AM / IP Logged

the best place would be at the steering colum to the orange wire or at the heater contorls use a multimeter to verify the wire and fuse properly

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

12V accessory source.

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.