the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Chev Avalanche


Post ReplyPost New Topic
< Prev Topic Next Topic >
gmandryk 
Member - Posts: 1
Member spacespace
Joined: October 16, 2002
Location: Canada
Posted: October 16, 2002 at 10:51 PM / IP Logged  

Does anybody have wiring info for 2002 Chev Avalanche.

I want to hook-up a remote starter with the Passlock2 security system bypass.

The Directstart CS124 model from the 12voltshop.com  was the one that I was looking to install.

Also any feedback about that model or manufacturer would be appreciated.

Thanks        Chev Avalanche -- posted image.

techker 
Copper - Posts: 70
Copper spacespace
Joined: April 24, 2002
Location: Canada
Posted: October 17, 2002 at 5:15 PM / IP Logged  
YEAR: 2002  MAKE: Chevrolet  MODEL: Avalanche  STYLE:
|       ITEM          |     WIRE COLOR      |POL |       WIRE LOCATION        |
|                 12V |red                  | +  |ignition harness            |
|             STARTER |yellow               | +  |ignition harness            |
|            IGNITION |pink                 | +  |ignition harness            |
|     SECOND IGNITION |white                | +  |ignition harness            |
|           ACCESSORY |orange               | +  |ignition harness            |
|          POWER LOCK |lt. blue             | +  |brown plug at BCM *1        |
|        POWER UNLOCK |white                | +  |brown plug at BCM *1        |
|          LOCK MOTOR |gray                 |    |drivers kick panel          |
|        UNLOCK MOTOR |tan                  |    |drivers kick panel          |
|       DISARM DEFEAT |tan/black            |    |passengers kick panel       |
|    PARKING LIGHTS + |brown                |    |lt. blue plug at BCM *1     |
|    PARKING LIGHTS - |white                |    |lt. blue plug at BCM *1     |
|          HEADLIGHTS |white                | +  |lt. blue plug at BCM *1     |
|        DOOR TRIGGER |*2                   | -  |BCM *1                      |
|FACTORY ALARM DISARM |lt.green             | -  |drivers kick *4             |
|          TACHOMETER |white                |    |ECM *3                      |
|         SPEED SENSE |dk.GREEN / WHITE       |    |ECM *3                      |
|          BRAKE WIRE |white                | +  |brake pedal switch          |
|        HORN TRIGGER |black                | -  |brown plug at BCM *1        |
|              WIPERS |                     |    |                            |
|   LF WINDOW UP/DOWN |blue   -   brown     | A  |drivers door switch         |
|   RF WINDOW UP/DOWN |blue   -   brown     | A  |passenger door switch       |
|   LR WINDOW UP/DOWN |                     |    |                            |
|   RR WINDOW UP/DOWN |                     |    |                            |
NOTES:
NOTE: This vehicle has the passlock II immobilizer system that, when
adding a remote start, must be interfaced with. Use DEI part 555t or 555L.
*1 The BCM is located behind the drivers side of the dash. The plugs on
the BCM face towards the rear of the vehicle. The parking lights are in pin
A5 and the headlights are in pin A11.
*2 Use tan for the drivers door located in pin B4 of the purple plug, and
for the passenger door it will be a orange in pin B2 in the purple plug or
dk.blue/white in pin B11 of the lt.blue plug, must diode isolate these
wires.
*3 ECM is located near the battery, down low, between the fender and the
fan under the black plastic cover. On the 4.8L, 5.3L, and 6.0L, the tach
wire is located at pin 10 in the 'red' connector, and VSS wire is located
in pin 50 of the 'red' connector.
*4 Also found in the purple plug of the BCM.
i can't realy tell you about it,don't install it.
techker
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: October 17, 2002 at 6:28 PM / IP Logged  

The CS 124 is easy to install. Make sure that you go through the programming manual a couple of times first before you enter into the programming sequence. The Banks and options get confusing after a while.

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, May 13, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer