Wiring diagram correct?

Home / the12volt's Install Bay / General Discussion / Wiring diagram correct? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

EluminusSVT

Member - Posts: 8

Joined: September 29, 2004

Posted: April 20, 2005 at 11:17 PM / IP Logged

Hey guys, just got my new 2005 tC and I'm tinkering around with some little things.

I'm going to be wiring up some LED's to a switch and I needed to know if this is the correct way? Also:

How do I know which fuse/amp to pull or piggy-back from?

Please help, thanks!

Dom

Wiring diagram correct? -- posted image.

"Your car set off my house alarm." - God bless cars.

Back to Top

Chad7n7

Silver - Posts: 408

Joined: March 09, 2004

Location: United States

Posted: April 23, 2005 at 11:23 PM / IP Logged

I wouldn't "piggyback" any of your wiring from the fuse box. This can cause damage to your vehicle.

Get your ignition power under the steering column. Also be sure to properly fuse your wiring.

Back to Top

Captanham

Silver - Posts: 365

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 18, 2004

Location: United States

Posted: April 26, 2005 at 11:16 AM / IP Logged

also, led's only take 3 volts, TOPS, make sure if you are putting an led on like that without a resistor, that it is a prewired led that has a resistor built in, (if it's some varad thing that already came with wires you'll be alright, but if you bought an led from radio shack, you'll need resistors)

Bad Boys Customs

audio - video - security

If you use it. Suport it. Donate to the 12 volt!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Wiring diagram correct?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.