Find Negative Coil Lead with Multimeter

Home / the12volt's Install Bay / General Discussion / Find Negative Coil Lead with Multimeter (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

audioduck

Member - Posts: 25

Joined: February 11, 2005

Posted: January 22, 2006 at 8:48 AM / IP Logged

Last year I put a CCS-100 on my motorcycle. I used a multimeter to find the negative coil lead. I'm helping someone else install one now and can't remember how I used the mutlimeter to find the negative coil lead. Thanks.

Back to Top

sparkie

Platinum - Posts: 2,061

Joined: November 06, 2003

Location: Canada

Posted: January 23, 2006 at 6:33 PM / IP Logged

Set the meter on an A/C voltage scale. Measure from ground to the suspected wire and you are looking for a signal that varies between 1 and 9 volts with RPM.

sparky

Back to Top

audioduck

Member - Posts: 25

Joined: February 11, 2005

Posted: January 24, 2006 at 2:32 AM / IP Logged

Thanks - just whar I needed,

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Find Negative Coil Lead with Multimeter

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.